Global autumn smal

The product in the picture may feature optional equipment.

Multi-planer MH410


Logosol’s multi-planer is a jointer, a planer and a moulder in one and the same machine. Furthermore, you can use it as a vertical milling machine equipped with a feeder unit. Unleash your creativity – the possibilities are endless!

No resetting between jointing, planing and moulding


Use the jointer on the upper machine table, and then plane two sides on the lower table, entirely without resetting!

To start with, you have a perfect jointer/planer, but it is also equipped with a side cutter. The construction is completely unique. You plane the width and thickness in one single operation. With the side cutter you can also mould the lumber. This means that you can make tongued and grooved flooring, for instance. When you are using the machine as a moulder, you machine the lumber twice in order to process the workpiece on all four sides. Compare this with a standard jointer/planer or a vertical milling machine, in which you have to machine the workpiece at least four times. Thanks to the width of the planer table, you can use the part closest to the side cutter for moulding and the other part for planing operation. This gives you a machine that does not require any resetting between jointing, planing and moulding. It is this unique combination that gives you all the possibilities!

The natural choice in small joinery workshops

The efficiency and the precision increase dramatically when using the multi-planer instead of a traditional jointer/planer or a vertical milling machine. The reason for this is that the workpiece first is machined on two sides by the jointing operation, and then it can be planed and mould on the remaining two sides in one single operation. This is of great use to you if you, for example, are producing joinery components.

You do not need any extra floor space, since you at a reasonable price get both efficiency and several valuable operations in one and the same machine. Due to this the multi-planer MH410 is the natural choice if you require high efficiency and precision.

Flexible planing

When delivered, the horizontal cutter is equipped with two planing knives, but the cutter can take a total of four planing knives. So, you can mount two additional knives when you want an extra fine surface finish. Normally, the two additional knife slots are used for moulding knives. Even though the maximum protrusion of a moulding knife in the horizontal cutter is 2 mm (1/8"), it is possible to produce several different profiles on the plane side of the workpiece.

Reliable feeding

In its standard design the machine is equipped with two ribbed steel rollers in front of the cutter and a rubber roller on the out-feed side. If required, the machine can be equipped with only rubber rollers. A separate motor runs the feed rollers via a robust chain transmission, which gives a very reliable feeding. A steplessly adjustable feeder is available as an option.

High quality gives safety and precision

The entire machine is built around the heavy cast iron table to give as high stability and durability as possible. The machine’s simple but robust design makes it secure and easy to survey so that you can feel safe while operating it.



”Due to the fact that the machine doesn’t have to be reset between jointing and planing operation, you can be sure that the machine keeps it basic setting. You can plane immediately after the jointing operation without even turning the motor off!"


Bengt-Olov Byström,

Founder of LOGOSOL




Technical data


Table width, jointer: 310 mm (12")
Table length, jointer: 1400 mm (55")
Cutting depth, jointer: 
0-8 mm (0-7/16")
Fence size: 
152 x 1100 mm (6" x 43 3/8")


Table width, planer:
410 mm (16")
Table length, planer: 
630 mm (24 7/8")
Max. planing width: 
410 mm (16")
Max. planing height: 
260 mm (10 1/4")
Max. cutting depth, planer: 
4 mm (3/16")

Cutter head

Diameter, cutter: 72 mm (2 7/8")
Number of revolutions: 6000 rpm
Motor: 3 kW (4.3 hp)


Diameter, feed rollers: 
32 mm (1 5/16")
Feed rate:
5 m/min (9 ft/min)
Variable feeding (option): 
2-12 m/min (7-39 ft/min)
Motor: 0.18 kW (0.25 hp)

Weight and electrical system

Weight 275 kg (540 lbs)
Electrical system: 3-phase, 400V, 16A
Also available as 1-phase 220V

Thermo guards: On each motor

  • No resetting between jointing, planing and moulding.
  • 2 or 4 planing knives in the cutter head.
  • Quick setting of the front jointer table
  • The scale for the planer table is in steps of 1 and 1/10 mm.
  • The rear jointer table can be microadjusted
  • Big and stable jointer fence.
  • Precision-processed machine tables of cast iron.
  • Separate motors for cutter and feeder.
  • Integrated jointer guard.

60 Day Money Back Guarantee

We give you a 60 day money back guarantee on all machines. You have two months to decide whether the machine suits you. Cutting equipment, planing and moulding knives and other consumable items are not included in the money back guarantee.


Two-Year Warranty

We provide you a two-year warranty on all new machines. It covers manufacturing defects and problems that have occured during normal use of the machines, with the exception of consumable items such as belts, guide bars and chains.


Fast deliveries

Most orders are supplied directly from our stock. During peak season delivery times may be slightly longer. The delivery times for accessories and spare parts are always very short.


Unlimited support

Unlimited support when it comes to product knowledge and use of products.


20-years of Hands-On Experience


We have 20 years of hands-on experience designing and working directly with Logosol equipment.


Personal service

To us, offering a first-rate personal service comes natural.

Money Back Guarantee

We only want satisfied customers. Therefore, we offer a 60-days 100% iron-clad money back guarantee.

Read more

2 Year warranty

We want to keep you cutting Lumber! Logosol will replace any part of the sawmill and planer found to be defective within two year of purchase.

Read more

Shop Online!

All Logosol products may be ordered online through the Logosol Store.

Shop Online!

Call Logosol

Do not hesitate to contact our sales staff if you have any questions. Call us at:

0046 611 182 85

Yair Minzari - Import & Marketing Services | 26 Averbuch St., Ramat Hasharon, 47400, Israel | Telephone: +972-543198199 | Fax: +972-35470206 |